American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1979. Last previous edition approved in 2000 as B 664 – 81 (2000). 2 p. This specification defines the criteria for composition and other requirements for brushes with a nominal silver content of 80 %, by weight, with the balance being substantially...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1979. Last previous edition approved in 2000 as B 663 – 94 (2000). 4 p. This specification covers electrical contact components made from silver-tungsten carbide by powder metallurgical procedures. This specification covers compositions within...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1979. Last previous edition approved in 2000 as B 662 – 94 (2000). 3 p. This specification covers electrical contact components made from silver-molybdenum by powder metallurgical procedures. This specification covers compositions within the...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1979. Last previous edition approved in 2005 as B 658/B 658M – 05. 5 p. This specification covers three grades of seamless and welded zirconium pipe. Unless a single unit is used, for example corrosion mass gain in mg/dm2, the values stated...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1979. Last previous edition approved in 2002 as B 653/B 653M – 02. 3 p. This specification covers fittings, factory made from three grades of zirconium and zirconium alloys. The term welding fittings applies to butt-welding parts such as 45...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1981. Last previous edition approved in 2005 as B 649 - 05. 7 p. This specification covers nickel-iron-chromium-molybdenum-copper-nitrogen alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and chromium-nickel-iron-nitrogen low-carbon...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1982. Last previous edition approved in 2003 as B 644 – 95 (2003). 5 p. This specification establishes the requirements for copper nickel, ferro copper, phosphor copper, and silicon copper master alloys in ingot, shot, and waffle form to be used...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published October 2005. Originally approved in 1978. Last previous edition approved in 2000 as B 643 – 00. 5 p. This specification establishes requirements for copper-beryllium alloy seamless tube in straight lengths. Copper Alloy UNS C17200 will be the alloy furnished whenever Specification...
American Society for Testing and Materials (ASTM). Current edition approved March 15, 2006. Published April 2006. Originally approved in 1978. Last previous edition approved in B 640 – 00. 9 p. This specification establishes the requirements for welded copper tube for air conditioning and refrigeration service for use in connections, repairs, and alterations. The tube shall be...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1977. Last previous edition approved in 2004 as B 626 - 04. 5 p. This specification covers welded tubes made from the nickel and nickel-cobalt alloys (UNS N10001, UNS N10242, UNS N10665, UNS N12160, UNS N10629, UNS N10624, UNS N10675, UNS N10276,...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2005. Published July 2005. Originally approved in 1977. Last previous edition approved in 2004 as B 625 – 04a. 2 p. This specification covers alloys UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 plate, sheet, and strip in the annealed temper. ASTM International has...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1977. Last previous edition approved in 2004 as B 622 – 04a. 6 p. This specification covers seamless pipe and tube of nickel and nickel-cobalt alloys (UNS N10001, UNS N10242, UNS N10665, UNS N12160, UNS N10675, UNS N10276, UNS N06455, UNS N06007,...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published December 2006. Originally approved in 1977. Last previous edition approved in 2002 as B 621 – 02. 3 p. This specification covers nickel-iron chromium-molybdenum alloy (UNS N08320)* rod for use in general corrosive service. The following products are covered under this...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1981. Last previous edition approved in 2005 as B 619 – 05. 6 p. This specification covers welded pipe of nickel and nickel-cobalt alloys (UNS N10001; UNS N10242; UNS N10665; UNS N12160; UNS N10624; UNS N10629; UNS N10675; UNS N10276; UNS N06455;...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1977. Last previous edition approved in 2000 as B 616 – 96 (2000). 2 p. This specification covers refined rhodium as sponge and powder in three grades as follows: 1 Grade 99.80—Rhodium having a purity of 99.80 %, 2 Grade 99.90—Rhodium having a...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1979. Last previous edition approved in 2000 as B 615 – 79 (2000). 3 p. This practice describes the practices and factors considered to be most important in the measurement of electrical contact noise of sliding contacts.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1977. Last previous edition approved in 2000 as B 614 – 95 (2000). 3 p. This practice covers a cleaning and descaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils,...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1976. Last previous edition approved in 2000 as B 613 – 76 (2000). 2 p. This guide defines the criteria for composition, properties, and other requirements for brushes containing a matrix of one or more conducting metallic elements or alloys and one...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1974. Last previous edition approved in 1999 as B 596 – 89 (1999). 3 p. This specification covers a wrought alloy containing gold and copper in the form of wire, rod, strip, and tubing for electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved Feb. 1, 2006. Published February 2006. Originally approved in 1973. Last previous edition approved in 2001 as B 592 – 01. 4 p. This specification covers the requirements for plate, sheet, strip, and rolled bar in alloys C66300 and C68800.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1973. Last previous edition approved in 1999 as B 589 – 94 (1999). 2 p. This specification covers refined palladium as sponge, cast bar, and wrought forms (Note 1) in one grade as follows: Grade 99.95 (UNS PO3995)— Palladium having a purity of...
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1973. Last previous edition approved in 2003 as B 587 – 97 (2003). 10 p. This specification establishes the requirements for round, rectangular, and square copper alloy welded tube for general engineering applications.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1973. Last previous edition approved in 1999 as B 576 – 94 (1999). 2 p. This guide covers the major variables which affect the rate of arc erosion of electrical contact materials and serves as a guide in developing more detailed specifications...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1972. Last previous edition approved in 2005 as B 574 – 05. 4 p. This specification covers rod of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06035, N06455, N06058, and N06059), low-carbon nickel-molybdenum-chromium-tantalum...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1972. Last previous edition approved in 2000 as B 573 – 00. 3 p. This specification covers nickel-molybdenum-chromium- iron alloys (UNS N10003 and UNS N10242) rod for use in general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1972. Last previous edition approved in 2003 as B 572 - 03. 4 p. This specification covers alloys UNS N06002, UNS N06230, UNS N12160, and UNS R30556 in the form of rod for heat resisting and general-corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2006. Published October 2006. Originally approved in 1972. Last previous edition approved in 2005 as B 570 – 05a. 4 p. This specification establishes the requirements for copper-beryllium alloy forgings and extrusions produced from the following alloys.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1972. Last previous edition approved in 2001 as B 563 – 01. 3 p. This specification covers an alloy containing palladium, silver, copper, platinum, and nickel in the form of wire, rod, and strip for electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1972. Last previous edition approved in 1999 as B 562 – 95 (1999). 4 p. This specification covers refined gold in cast bar form (Note 1): Grade 99.5—Gold having a minimum fineness of 995. Grade 99.95— Gold having a minimum fineness of 999.5. Grade...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1972. Last previous edition approved in 1999 as B 561 – 94 (1999). 2 p. This specification covers refined platinum as sponge, cast bar, and wrought forms (Note 1) in two grades as follows: Grade 99.95 (UNS PO4995)— Platinum having a purity of...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1972. Last previous edition approved in 2000 as B 560 - 00. 3 p. This specification covers three alloy types, made from tin, antimony, and copper, used in the fabrication of pewter articles by casting, spinning, drawing, or forming. The metal...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1970. Last previous edition approved in 2001 as B 541 – 01. 3 p. This specification covers a gold-rich, age-hardenable alloy in rod, wire, and strip form applicable to electrical contacts. The values stated in inch-pound units are to be regarded...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1970. Last previous edition approved in 2004 as B 535 – 04. 3 p. This specification covers alloys UNS N08330 and N08332 in the form of hot-finished and cold-finished seamless pipe and tube intended for heat resisting applications and general...
American Society for Testing and Materials (ASTM). Current edition approved Sept. 1, 2006. Published September 2006. Originally approved in 1970. Last previous edition approved in 2002 as B 523/B 523M – 02. 5 p. This specification covers three grades of zirconium and zirconium alloy seamless and welded tubes. Unless a single unit is used, for example corrosion mass gain in...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1970. Last previous edition approved in 2001 as B 522 – 01. 2 p. This specification covers 69 % gold, 25 % silver, 6 % platinum alloy tubing, rod, wire, and sheet material for sliding electrical contacts.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1970. Last previous edition approved in 2003 as B 517 – 03. 3 p. This specification covers welded, cold-worked, and annealed nickel-chromium-iron alloy (UNS N06600, N06603, N06025, and N06045) pipe for general corrosive service and...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1970. Last previous edition approved in 2002 as B 514 – 95 (2002). 3 p. This specification covers nickel-iron-chromium alloys in the form of welded, cold-worked, and annealed pipe for general corrosive service and heat-resisting applications....
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1970. Last previous edition approved in 2001 as B 511 – 01. 5 p. This specification covers wrought alloys UNS N08330 and UNS N08332 in the form of hot-finished and cold-finished bar and shapes intended for heat-resisting applications and general...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1969. Last previous edition approved in 2000 as B 497 – 00. 3 p. This guide describes recommended procedures to accurately measure voltage drop across current carrying contacts and the parameters to be documented in order to effectively record the...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1969. Last previous edition approved in 2001 as B 495 – 01. 3 p. This specification covers six grades of zirconium ingots. The values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each...
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1968. Last previous edition approved in 2001 as B 476 – 01. 4 p. This specification covers general requirements common to wrought precious metal electrical contact alloy products in the form of sheet, strip, wire, and rod. Unless otherwise specified...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published November 2005. Originally approved in 1967. Last previous edition approved in 2004 as B 464 – 04. 3 p. This specification covers welded UNS N08020, N08024, and N08026 alloy pipe for general corrosion-resisting and low- or high-temperature service.
American Society for Testing and Materials (ASTM). Current edition approved Oct. 1, 2005. Published November 2005. Originally approved in 1967. Last previous edition approved in 2001 as B 453/B 453M – 01. 5 p. This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper Alloys UNS Nos. C33500, C34000,...
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1966. Last previous edition approved in 2004 as B 444 - 04. 4 p. This specification covers nickel-chromium-molybdenum-columbium alloys (UNS N06625 and UNS N06852) and nickel-chromium-molybdenum-silicon alloy (UNS N06219) in the form of...
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1966. Last previous edition approved in 2000 as B 443 - 00. 8 p. This specification covers rolled nickel-chromium-molybdenum-columbium alloy (UNS N06625) and nickel-chromium-molybdenum-silicon alloy (UNS N06219)* plate, sheet, and strip
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1966. Last previous edition approved in 2000 as B 440 – 00. 3 p. This specification covers refined cadmium metal in slab, ball or stick form. The values stated in inch-pound units are to be regarded as the standard.
American Society for Testing and Materials (ASTM). Current edition approved June 1, 2006. Published June 2006. Originally approved in 1966. Last previous edition approved in 2003 as B 435 - 03. 3 p. This specification covers alloys UNS N06002, UNS N06230, UNS N12160, and UNS R30556 in the form of rolled plate, sheet, and strip for heat-resisting and general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved Dec. 1, 2006. Published January 2007. Originally approved in 1966. Last previous edition approved in 2000 as B 434 – 00. 3 p. This specification2 covers nickel-molybdenum-chromium-iron alloys (UNS N10003 and UNS N10242) plate, sheet, and strip for use in general corrosive service.
American Society for Testing and Materials (ASTM). Current edition approved Nov. 1, 2005. Published February 2006. Originally approved in 1964. Last previous edition approved in 1999 as B 425 – 99. 5 p. This specification2 covers nickel-iron-chromium-molybdenum-copper alloy (UNS N08825 and UNS N08221) in the form of hot-finished and cold-drawn rounds, squares, hexagons, and...
American Society for Testing and Materials (ASTM). Current edition approved May 1, 2005. Published June 2005. Originally approved in 1964. Last previous edition approved in 1998 as B 424 – 98a. 4 p. This specification2 covers rolled nickel-iron-chromium-molybdenum-copper alloy (UNS N08825 and UNS N08221) plate, sheet, and strip.